Spherical outboard constant velocity joint ball bearing cage, part of the vehicle's drive system, made of material suitable to be carburized with a carbon content of 0,14 % or more but not more than 0,57 %, forged, turned, punched, milled and hardened

two cardan rods, -central universal joint, -central bearing with suspension in a plastic cover, -universal joints on both ends of the shaft, -slip, tube and end yokes, -of a length of 1,4 m or more but not more than 2,4 m,for use in the production of goods of Chapter 87

Transmission shaft in carbon fibre reinforced plastics consisting of a unique piece without any joint in the middle - of a length of 1 m or more but not more than 2 m, - of a weight of 6 kg or more but not more than 9 kg

6 ball tracks or more but not more than 8, with -a thread, -an external involute spline with 21 or more but not more than 38 teeth, -for running with bearing balls made of steel with a carbon content of 0,48 % or more but not more than 0,57 %, -forged, turned, milled and hardened

an outer diameter of 67,0 mm or more but not more than 99,0 mm, -3 cold calibrated roller tracks with a diameter of 29,95 mm or more but not more than 49,2 mm, -an external spline with 21 teeth or more but not more than 41, -forged, turned, rolled and hardened

Double flange bearing of 3rd generation, for motor vehicles,- with double-row ball bearing,- whether or not with impulse (encoder) ring,- whether or not with antilock brake system (ABS) sensor,- whether or not with mounted screws,for use in the manufacture of goods of chapter 87

3 trunnions with a diameter of 17,128 mm or more but not more than 25,468 mm, -forged, turned, broached and hardened

an outer diameter of 67,0 mm or more but not more than 84,5 mm,-3 cold calibrated roller tracks with a diameter of 29,90 mm or more but not more than 36,60 mm,- sealing diameter 34,0 mm or more but not more than 41,0 mm, without lead angle,-spline with 21 teeth or more but not more than 35,-bearing seat diameter of 25,0 mm or more but not more than 30,0 mm, with or without oil grooves

an inner race with 6 ball tracks or more but not more than 8 for running with the bearing balls with a diameter of 13,0mm or more but not more than 28,0mm,-an outer race with 6 ball tracks or more but not more than 8 for running with the bearing balls, made of steel with carbon content of 0,45% or more but not more than 0,58%, with thread and with a spline with 22 teeth or more but not more than 44,-a spherical cage keeping bearing balls in the ball tracks of outer race and inner race in proper angular position, made of material suitable for carburizing with carbon content of 0,14% or more but not more than 0,55%, and-with a grease compartment,-capable of working at constant speed at variable articulation angle not higher than 52 degrees

Specific pre-assembled or ready-to assemble sections for new mobile cranes

Other